Can 3D printed parts hold up in an engine bay or elsewhere on a car when compared to the use of lightweight aluminium or similar, or is it still just technology best leveraged for prototyping?

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

Grant Luttinen of Intamsys helps us understand some of the pros and cons of additive manufacturing, what is required when it comes to software and some options out there for printers as a hobbyist or professional.

We take a quick look at printing options from $1,700 to $150,000 USD, as well as printing media/materials that start from $20-40 for a spool of ABS plastic and then go to $100, $600 or more for nylon, PEEK carbon fibre and 3D printed metal options.

Accusumps. Whether you're a motorsport enthusiast, a professional racer, or simply keen on advanced car maintenance, this video covers many of the common questions on how an Accusump can enhance your engine's reliability and performance and bridge the gap between a wet sump and (let's be honest, expensive) dry sump upgrade.

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

Iann Criscuolo from Canton Racing Products answers some of the common questions we all have when it comes to how an Accusump works by filling with oil and supplying it via manual or electronic control that can be based on RPMs, g-force and more, how easy Accusumps are to setup with their optimal -10 ('dash 10') hose sizing recommendations and how long you can expect oil to be supplied at 7-10 psi of pressure.

It's important to note that you can set your Accusump to fill much faster by using higher pressures, but that also means the oil will be supplied to your engine much faster, so racers need to find a balance that suits their application whether that is drift, drag, circuit, offroad racing or something else.

The formula for building a big-power LS is pretty simple — but things get a little more complicated when the motor needs to produce all that power for sustained periods of time in applications like drift or circuit racing. In this episode, we sit down with Mitch Pullen of Pullen Spec Engines, who specialises in putting together ultra-durable LS builds to discuss the ins and outs of these motors and much more.

Use “PULLEN50” to get $50 OFF our HPA Engine Building Starter Package:
https://hpcdmy.co/enginepackageb

Thanks to his father’s involvement in motorsport, Mitch Pullen started young, assisting in the pits and moving into the karting world at 10 years old. By 14, he was building engines, creating his own wiring harnesses, and figuring out fabrication. It’s probably no surprise, then, that he left school fairly early to learn everything he could about nearly all aspects of motorsport engineering.

Although Mitch is a jack of all trades, he decided to focus on performance engine building, and this now sees him running the well-respected and very busy Pullen Spec Engines based out of the Gold Coast in Queensland, Australia.

In this conversation, Mitch goes into detail about how he builds LSs, discussing their inherent weaknesses and strengths and the work that’s needed to create a motor that can sustain high horsepower and high RPMs for more than just a pull or two on the motorway or a run down the strip.

Mitch is also well known for his unique S13 Silvia competition drift car, which runs a massive Roots-style blower sitting atop a Dart iron-block LS. There are a few obvious questions when it comes to this setup — why bother with this type of supercharger, how does it behave in a drift car, and can you even see anything when you’re driving? Mitch answers all these questions and more.

The conversation finishes with some great discussions around car setup, forged vs cast engine parts, performance aircraft engine builds, and more.

Watts linkage illustration: https://hpcdmy.co/watts

Follow Mitch here:
IG: @pullenspecengines, @mitchellpullen
FB: Pullen Spec Engines
WWW: pullenspec.com

Don’t forget, you can use“PULLEN50” to get $50 OFF our HPA Engine Building Starter Package: https://hpcdmy.co/enginepackageb

Timestamps:
4:08 How did you form an interest in cars?
11:31 Did you do any formal engine-building training?
15:09 Where did you go from rebuilding 2 stroke karts?
20:07 Watts link vs Pan hard rod overview.
24:53 Getting more power in the KE70.
31:43 How did you learn all these skills at such a young age?
32:52 What happened after the Khanacross?
35:03 Learning about LS engines and circuit cars.
45:40 Load on an engine for a sustained amount of time.
48:52 What do you do in your LS to make it live?
59:08 LS engine package.
1:07:27 Forged vs cast pistons.
1:16:52 Does the LS have enough factory clearance for boosted applications.
1:27:16 Why the roots blower?
1:35:57 Overview of Pullen Spec Engines.
1:45:50 Focusing on the LS.
1:48:47 Final three questions.